SECTION 1 – IDENTIFICATION
Product Name
Darknite Glow™ Epoxy Resin
Product Use
Two-component epoxy resin component for casting, coating, laminating, encapsulation, adhesives, artwork, flooring, composite fabrication and industrial applications.
Product Type
Epoxy Resin (Part A)
Supplier
Darknite Glow
Singapore
Website: https://darkniteglow.com
Email: enquiry @ darkniteglow.com
Emergency Contact
For chemical emergencies contact your local emergency services or poison centre.
SECTION 2 – HAZARD IDENTIFICATION
GHS Classification
Skin Irritation – Category 2
Eye Irritation – Category 2A
Skin Sensitisation – Category 1
Hazardous to the Aquatic Environment (Chronic) – Category 2
Signal Word
WARNING
Hazard Statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Precautionary Statements
Avoid breathing vapours or mists.
Avoid prolonged skin contact.
Wear suitable chemical resistant gloves.
Wear protective clothing and eye protection.
Wash thoroughly after handling.
Avoid release into the environment.
If skin irritation or rash occurs, seek medical advice.
Dispose of contents according to local regulations.
SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS
| Component | CAS Number | Approx. Concentration |
|---|---|---|
| Bisphenol A Epoxy Resin (DGEBPA Polymer) | 25085-99-8 | 60–100% |
| Benzyl Alcohol | 100-51-6 | 10–30% |
| Phenol Formaldehyde Glycidyl Ether | 28064-14-4 | 1–10% |
SECTION 4 – FIRST AID MEASURES
Eye Contact
Immediately flush eyes with clean running water for at least 15 minutes while holding eyelids open. Obtain medical attention if irritation persists.
Skin Contact
Remove contaminated clothing.
Wipe excess material from skin.
Wash thoroughly with soap and water.
Do not use solvents to clean skin.
Seek medical attention if irritation or allergic reaction develops.
Inhalation
Move affected person to fresh air.
Keep comfortable for breathing.
Seek medical attention if symptoms persist.
Ingestion
Rinse mouth thoroughly.
Do not induce vomiting unless instructed by medical personnel.
Seek medical advice if significant quantities are swallowed.
SECTION 5 – FIRE FIGHTING MEASURES
Suitable Extinguishing Media
- Dry chemical
- Carbon dioxide (CO₂)
- Foam
Unsuitable Media
Direct water jet.
Hazardous Combustion Products
- Carbon monoxide
- Carbon dioxide
- Phenolic compounds
- Irritating smoke
Protective Equipment
Firefighters should wear self-contained breathing apparatus and full protective equipment.
SECTION 6 – ACCIDENTAL RELEASE MEASURES
Wear suitable PPE.
Prevent material from entering drains or waterways.
Contain spill using sand, earth or inert absorbent material.
Collect into suitable labelled containers for disposal.
Clean remaining residue using warm soapy water.
Dispose according to local regulations.
SECTION 7 – HANDLING AND STORAGE
Store between 4°C and 49°C.
Keep containers tightly sealed.
Store in a cool, dry and well-ventilated area.
Protect from moisture and direct sunlight.
Avoid prolonged skin contact.
Do not breathe heated vapours.
When mixed with epoxy hardener, large quantities may generate considerable heat during curing.
SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Controls
Provide adequate ventilation.
Use local exhaust where necessary.
Eye Protection
Chemical splash goggles or safety glasses with side shields.
Hand Protection
Chemical resistant gloves including:
- Nitrile
- Butyl rubber
- Neoprene
Skin Protection
Protective clothing with long sleeves.
Respiratory Protection
Normally not required under adequate ventilation.
Use an approved organic vapour respirator if ventilation is insufficient.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
| Property | Value |
|---|---|
| Appearance | Clear viscous liquid |
| Colour | Clear |
| Odour | Mild |
| Physical State | Liquid |
| Specific Gravity | Approximately 1.15 |
| Water Solubility | Slight |
| Viscosity | Approximately 1000 cP |
| Boiling Point | >204°C |
| Vapour Pressure | <1 mmHg (20°C) |
| Flash Point | >93°C |
| pH | Not applicable |
SECTION 10 – STABILITY AND REACTIVITY
Stable under normal storage conditions.
Avoid:
- Excessive heat
- Strong acids
- Strong bases
- Amines
- Mercaptans
Hazardous polymerisation does not occur by itself.
Mixing with curing agents produces an exothermic reaction.
Large masses may generate significant heat.
Hazardous decomposition products include:
- Carbon monoxide
- Carbon dioxide
- Phenolic compounds
SECTION 11 – TOXICOLOGICAL INFORMATION
Likely Routes of Exposure
- Skin
- Eyes
- Inhalation
Potential Health Effects
Skin
May cause irritation and allergic skin sensitisation.
Eyes
May cause moderate irritation.
Inhalation
Heated vapours may cause headache, dizziness and respiratory irritation.
Ingestion
Low acute toxicity.
Repeated Exposure
Repeated skin exposure may result in allergic dermatitis.
Carcinogenicity
No ingredients present at reportable concentrations are classified as carcinogenic by OSHA, IARC or NTP.
SECTION 12 – ECOLOGICAL INFORMATION
Uncured epoxy resin may be harmful to aquatic organisms.
Prevent release into drains, waterways and soil.
Material may persist in the aquatic environment.
Dispose responsibly.
SECTION 13 – DISPOSAL CONSIDERATIONS
Dispose of waste in accordance with local environmental regulations.
Do not discharge into drains.
Empty containers may retain product residue.
Allow mixed resin and hardener to fully cure before disposal where permitted by local regulations.
SECTION 14 – TRANSPORT INFORMATION
| Mode | Classification |
|---|---|
| UN Number | UN3082 |
| Proper Shipping Name | Environmentally Hazardous Substance, Liquid, N.O.S. (Epoxy Resin) |
| Hazard Class | 9 |
| Packing Group | III |
| Marine Pollutant | Yes |
Transport regulations may vary depending on package size and jurisdiction.
SECTION 15 – REGULATORY INFORMATION
Prepared in accordance with:
- Globally Harmonized System (GHS)
- Applicable workplace chemical safety regulations
All users should comply with applicable local, regional and national regulations governing chemical handling and disposal.
SECTION 16 – OTHER INFORMATION
This Safety Data Sheet provides guidance for the safe handling, storage, transportation and disposal of this product.
The information is believed to be accurate at the date of publication and is based upon currently available data. It relates only to the specific product identified and may not be valid when used in combination with other materials or processes.
Users are responsible for determining the suitability of this product for their intended application and for complying with all applicable laws and regulations.