SDS – Glow Color Pigment Range – Safety Data Sheet

SECTION 1 – Identification Product Identifier Product Name Glow in the Dark Pigment – Glow Color Pigment Range Product Type Photoluminescent Pigment Recommended Use Photoluminescent pigment for incorporation into paints, inks, plastics, resins, ceramics, concrete, coatings, textiles and other industrial or decorative products. Restrictions on Use For industrial, commercial and professional use. Not intended for […]

SECTION 1 – Identification

Product Identifier

Product Name

Glow in the Dark Pigment – Glow Color Pigment Range

Product Type

Photoluminescent Pigment

Recommended Use

Photoluminescent pigment for incorporation into paints, inks, plastics, resins, ceramics, concrete, coatings, textiles and other industrial or decorative products.

Restrictions on Use

For industrial, commercial and professional use. Not intended for direct consumption.

Supplier

Darknite Glow

Singapore

Website:
https://darkniteglow.com

Emergency Telephone

+65 6287 3059


SECTION 2 – Hazard Identification

GHS Classification

This product is not classified as hazardous according to the Globally Harmonized System (GHS).

Label Elements

Signal Word

None

Hazard Pictograms

None required.

Hazard Statements

Not classified as hazardous.

Precautionary Statements

Avoid generating excessive dust.

Avoid breathing dust.

Avoid prolonged eye contact.

Wash hands after handling.

Use good industrial hygiene practices.


SECTION 3 – Composition / Information on Ingredients

Chemical Identity

Strontium Aluminate based photoluminescent pigment doped with rare earth activators.

Main Components

  • Alkaline Earth Metal Aluminate
  • Europium Activator
  • Dysprosium Co-Activator
  • Inorganic Oxides

Appearance

Light yellow powder.


SECTION 4 – First Aid Measures

Inhalation

Move person to fresh air.

Seek medical advice if respiratory irritation persists.

Skin Contact

Wash thoroughly with soap and water.

No known long-term effects.

Eye Contact

Flush immediately with clean water for at least 15 minutes.

Seek medical attention if irritation continues.

Ingestion

Rinse mouth thoroughly.

Drink water.

Do not induce vomiting unless instructed by medical personnel.

Obtain medical advice if discomfort develops.

Most Important Symptoms

Dust may cause temporary mechanical irritation to:

  • Eyes
  • Nose
  • Throat
  • Skin

SECTION 5 – Fire Fighting Measures

Suitable Extinguishing Media

  • Water spray
  • Foam
  • Dry chemical
  • Carbon dioxide

Specific Hazards

Product is non-combustible.

Packaging materials may burn.

Protective Equipment

Use self-contained breathing apparatus when fighting surrounding fires.


SECTION 6 – Accidental Release Measures

Avoid creating airborne dust.

Wear suitable PPE.

Collect material using:

  • Vacuum equipped with HEPA filter
  • Mechanical sweeping
  • Shovel into suitable container

Prevent unnecessary release into drains.

Dispose according to local regulations.


SECTION 7 – Handling and Storage

Safe Handling

Avoid dust generation.

Use adequate ventilation.

Avoid contact with eyes.

Do not eat, drink or smoke during use.

Wash hands after handling.

Storage

Store in tightly sealed containers.

Keep dry.

Protect from moisture.

Store away from acids.

Recommended storage temperature:

5°C–35°C

Shelf Life

More than 24 months when properly stored.


SECTION 8 – Exposure Controls / Personal Protection

Engineering Controls

General mechanical ventilation.

Local exhaust where dust levels may become excessive.

Eye Protection

Safety glasses recommended.

Hand Protection

Protective gloves.

Respiratory Protection

Dust mask (P2/N95 or equivalent) where airborne dust is generated.

Protective Clothing

Normal work clothing or laboratory coat.

Hygiene Measures

Wash hands before eating or drinking.


SECTION 9 – Physical and Chemical Properties

Appearance

Fine powder

Colour

Light yellow

Odour

Odourless

pH

Not applicable

Melting Point

Not available

Flash Point

Not applicable

Auto-Ignition

Not applicable

Flammability

Non-flammable

Explosive Properties

Not explosive.

Fine airborne dust may present dust explosion risk under extreme industrial conditions.

Density

Approximately 3.6 g/cm³

Water Solubility

Insoluble

VOC Content

None


SECTION 10 – Stability and Reactivity

Chemical Stability

Stable under normal conditions.

Conditions to Avoid

Moisture.

Excessive dust generation.

Incompatible Materials

Strong acids.

Hazardous Decomposition

None known under normal use.


SECTION 11 – Toxicological Information

Expected Routes of Exposure

  • Inhalation
  • Eye contact
  • Skin contact

Acute Toxicity

No known acute toxicity.

Skin Corrosion

Not expected.

Eye Irritation

Dust may cause temporary irritation.

Respiratory Irritation

Dust may cause irritation.

Carcinogenicity

No known carcinogenic components.

Mutagenicity

No known effects.

Reproductive Toxicity

No known effects.


SECTION 12 – Ecological Information

Ecotoxicity

No known significant environmental hazards.

Persistence

Inorganic mineral.

Mobility

Insoluble in water.

Bioaccumulation

Not expected.

Environmental Precautions

Prevent unnecessary release of large quantities into waterways.


SECTION 13 – Disposal Considerations

Dispose of unused material according to local regulations.

Empty containers should be cleaned before recycling or disposal.

Do not discharge into drains.


SECTION 14 – Transport Information

UN Number

Not regulated.

ADR/RID

Not dangerous goods.

IMDG

Not dangerous goods.

IATA

Not dangerous goods.

Marine Pollutant

No.


SECTION 15 – Regulatory Information

This product is not classified as hazardous under the Globally Harmonized System (GHS).

Users are responsible for ensuring compliance with applicable local regulations.


SECTION 16 – Other Information

Issue Date

July 2026

Revision

1.0

Prepared For

Darknite Glow

Recommended Use

Industrial and commercial photoluminescent pigment.

Disclaimer

The information contained in this Safety Data Sheet is believed to be accurate based on current knowledge and experience. It is provided solely as guidance for the safe handling, use, processing, storage, transportation, disposal, and release of the product. It does not constitute a warranty or guarantee of product performance. Users are responsible for determining the suitability of the product for their intended application and for complying with all applicable regulations.