High Performance Two-Part Clear Epoxy Resin System
Product Description
Darknite Glow™ Epoxy Resin is a premium two-component epoxy resin system designed for casting, coating, laminating, encapsulation, artwork, river tables, jewellery, flooring, composite fabrication and industrial applications.
When mixed with the appropriate hardener, it cures to form a tough, durable, high-gloss surface with excellent adhesion, chemical resistance and mechanical strength.
Suitable for use on:
- Wood
- Concrete
- Metal
- Fiberglass
- Carbon Fibre
- Stone
- Ceramics
- Most rigid plastics
Product Features
- Crystal clear finish
- Excellent self-levelling properties
- High gloss appearance
- Excellent adhesion
- Good chemical resistance
- Low shrinkage
- Low odour formulation
- Excellent moisture resistance
- High mechanical strength
- Suitable for pigments and special effect powders
- Compatible with glow-in-the-dark pigments
- Compatible with fluorescent pigments
- Compatible with metallic powders
- Compatible with glitter and decorative fillers
Typical Applications
Decorative
- River tables
- Countertops
- Furniture coating
- Art panels
- Resin artwork
- Coasters
- Jewellery
- Crafts
Industrial
- Protective coatings
- Composite laminating
- Carbon fibre parts
- Fibreglass repairs
- Encapsulation
- Electrical potting
- Tooling
- Mould making
Technical Specifications
| Property | Typical Value |
|---|---|
| Product Type | Two-Part Epoxy Resin |
| Appearance | Clear Liquid |
| Colour | Transparent |
| Finish | High Gloss |
| Mixing Ratio | Refer to product packaging |
| Viscosity | Medium |
| Density | Approximately 1.15 g/cm³ |
| Solids Content | High Solids |
| VOC | Low |
| Water Resistance | Excellent |
| Chemical Resistance | Excellent |
| Abrasion Resistance | Excellent |
| UV Resistance | Moderate (Indoor applications recommended unless UV stabilised topcoat is used.) |
Mixing Instructions
Mix only the amount required for immediate use.
- Measure resin and hardener accurately according to the specified mixing ratio.
- Mix slowly for approximately 3–5 minutes.
- Scrape sides and bottom of the mixing container.
- Transfer into a second clean container and mix again for best results.
- Avoid whipping excessive air into the mixture.
Incorrect mixing ratios may result in incomplete curing.
Pot Life
Approximately 30–45 minutes at 25°C
Higher temperatures will significantly reduce working time.
Lower temperatures increase working time.
Recommended Application Temperature
Ideal Ambient Temperature
20°C – 30°C
Relative Humidity
Below 80%
Substrate should be clean, dry and free from contaminants.
Surface Preparation
For best adhesion:
- Remove dust
- Remove grease
- Remove wax
- Remove loose coatings
- Ensure surface is dry
- Sand glossy surfaces before application
Proper surface preparation is essential for optimum performance.
Application Methods
Suitable for:
- Pouring
- Roller
- Brush
- Squeegee
- Notched trowel
- Casting moulds
For large pours, multiple thin layers are recommended to minimise excessive heat generation.
Curing Schedule
| Temperature | Pot Life | Initial Cure | Light Handling | Full Cure |
|---|---|---|---|---|
| 20°C | 40–50 min | 12–18 hrs | 24 hrs | 7 days |
| 25°C | 30–40 min | 8–12 hrs | 24 hrs | 7 days |
| 30°C | 20–30 min | 6–8 hrs | 18 hrs | 5–7 days |
Actual curing times vary depending on:
- Ambient temperature
- Humidity
- Pour thickness
- Product quantity
Coverage
Coverage depends on film thickness.
Approximate guide:
| Thickness | Coverage |
|---|---|
| 1 mm | 1 m²/L |
| 2 mm | 0.5 m²/L |
| 3 mm | 0.33 m²/L |
Compatible Materials
Darknite Glow™ Epoxy Resin is compatible with:
- Glow-in-the-Dark Pigments
- Fluorescent Pigments
- Metallic Powders
- Pearl Pigments
- Mica Powders
- Alcohol Inks
- Resin Dyes
- Decorative Glitter
- Natural Wood
- Fibreglass
- Carbon Fibre
Storage
Store in original unopened containers.
Recommended storage temperature:
5°C – 30°C
Keep away from:
- Direct sunlight
- Heat sources
- Moisture
Keep containers tightly closed when not in use.
Shelf Life
Up to 24 months when stored under recommended conditions in unopened containers.
Packaging
Available sizes may include:
- 500 g
- 1 kg
- 2 kg
- 5 kg
- 10 kg
- 20 kg
(Custom packaging available upon request.)
Limitations
- Do not apply onto damp surfaces.
- Avoid application during rain or high humidity.
- Large volume pours may generate excessive heat.
- UV exposure may cause yellowing over time unless protected with a UV-resistant topcoat.
- Always perform a small compatibility test before mixing with colourants or additives.
Health & Safety
- Wear protective gloves.
- Wear eye protection.
- Use in a well-ventilated area.
- Avoid skin contact.
- Refer to the latest Safety Data Sheet (SDS) before use.
Product Compatibility
Recommended with:
- Darknite Glow™ Glow-in-the-Dark Pigments
- Darknite Glow™ Fluorescent Pigments
- Darknite Glow™ UV Reactive Pigments
- Darknite Glow™ Metallic Pigments
- Darknite Glow™ Resin Colourants
Technical Support
For application advice, pigment loading recommendations, or custom formulations, contact:
Darknite Glow
Website: https://darkniteglow.com
Email: enquiry @ darkniteglow.com